The Cygnus 2PLUS is a simple to use, multi-mode thickness gauge having Multiple-Echo, Echo-Echo and Single-Echo capabilities. The NEW high durability end-mounted rotatable LCD display makes it ideally suited for climbing and rope access.
The twin shot injection moulded enclosure has a soft but durable TPE outer skin which is comfortable to hold and protects against bumps while the hard internal shell offers maximum strength and environmental protection certified to the demanding US MIL STD 810G standard.
Perfect for use on flat plate, curved surfaces or pipes our Multiple-Echo single crystal probe technology means you can measure through thick coatings and only the remaining metal thickness is displayed.
The unit still relies on Multiple-Echo to provide simple and accurate measurements, with the added benefit of Echo‑Echo and Single-Echo using twin crystal probes for extreme corrosion. Echo-Echo for measurements on painted metals but with heavy back wall corrosion / pitting and Single‑Echo for measurements on uncoated surfaces with heavy front face and/or back-wall corrosion and attenuative materials such as cast metals or plastics / composites.
Cygnus Instruments builds all of its equipment in the UK using only genuine and original parts and components – including Lemo® Connectors and Peli® Cases.
|Measuring Modes||Multiple-Echo using 3 sound pulses to ignore coatings up to 20mm thick
Echo-Echo using 2 sound pulses to ignore coatings up 1mm thick
Single-Echo using 1 sound pulse
|Materials||Sound velocities between 1000 – 9000 m/s – covers virtually all common engineering materials|
|Accuracy||±0.1 mm or 0.1% of thickness measurement, whichever is greatest, when calibrated in accordance with Cygnus Instruments calibration procedure|
|Resolution||Multiple-Echo mode – 0.1 or 0.05 mm
Single-Echo and Echo-Echo modes – 0.01 mm
|Measurement Range in Steel||Single Crystal Probes in Multiple-Echo:
Twin Crystal Probes in Single-Echo:
Twin Crystal Probes in Echo-Echo:
|Connector||Twin Lemo 00|
|Power||3 x AA batteries|
|Battery Life||10 hours minimum|
|Electronics||Dual channel pulser|
|Display||End-mounted LCD (rotatable)|
|Size||132 x 82 x 34 mm|
|Weight||300 grams (inc. batteries)|
|Operating Temperature||-10°C to 50°C|
|Environmental Rating||IP67 (dust tight and immersion – 1 metre for 30 mins)
Explosive Atmosphere: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Protection Association Code (NFPA 70), Article 500, and tested using MIL STD 810G Method 511.5, Procedure I
MIL STD 810G Method 501.6 (high temp +55°C)
MIL STD 810G Method 502.6 (low temp -20°C)
MIL STD 810G Method 507.6 (humidity 95%)
MIL STD 810G Method 512.6 (immersion – 1 metre for 30 mins)
|Shock and Impact||MIL STD 810G Method 514.7 (vibration – 1 hour each axis)
MIL STD 810G Method 516.7 (shock 20g – 11ms half sine shock pulse, 40g 11ms in each axis)
MIL STD 810G Method 516.7 (26 drops – transit drop 1.22 m)
|Standards||Designed for EN 15317|
|Environmental||RoHS, WEEE compliant|
|Warranty||3 years on gauge and 6 months on probe|
Stainless Steel INOX Single Crystal Probes
The INOX probes have an updated ergonomic design and an easier to read frequency, identification and serial numbering. All frequencies of INOX probes have a black face and a colour coding ring to identify probe frequency.
Used in Multiple-Echo mode, these probes require no zeroing, have a high linear accuracy, are ideal for general thickness gauging and on pipes and have replaceable wear membrane for long life.
Stainless Steel INOX Twin Crystal Probes
Used in Echo-Echo and Single-Echo modes and focussed ultrasound beam with improved measurability on extreme back wall corrosion and pitting.
For optimum performance of the ultrasonic thickness gauge it is essential to utilise the appropriate probe for the specific material being tested. Here below are the probe options available.
|Single Crystal Probes:||6 mm – 5 MHz (S5A)|
|13 mm – 2.25 MHz (S2C (standard)), 3.5 MHz (S3C) or 5 MHz (S5C)|
|19 mm – 2.25 MHz (S2D)|
|Twin Crystal Probes:||5 mm – 7.5 MHz (T7A)|
|8 mm – 5 MHz (T5B (standard))|
|12 mm – 2 MHz (T2C (for attenuative materials such as cast metals, plastics and composites))|
Using standard industry connectors the probe lead uses a custom made over moulded cable that offers superior flexibility and resistance to oils and ultraviolet light. The cable will not stiffen after exposure to ultraviolet light.
Along with the wrist and neck straps supplied in the kit there is also an optional belt clip, offering a range of flexible handling solutions for all types of applications.